Figure 12 Add/Edit Authority Group; Figure 13 Configuration > Pbx > Extension Management > Authority Group; Figure 14 Authority Group Configuration - ZyXEL Communications IP PBX X6004 User Manual

2 Click the Add icon to open the following screen. Enter the name of the group (Basic in
this example) and click Add. The Machine ID field is a name automatically assigned to
the X6004.

Figure 12 Add/Edit Authority Group

3 The new authority group displays in the following screen. Now you will add SIP
extensions to the authority group. Click the new authority group's Advanced icon.
Figure 13 Configuration > PBX > Extension Management > Authority Group
4 The following screen displays. Click Add SIP Peers to configure multiple SIP accounts
at the same time.

Figure 14 Authority Group Configuration

5 Configure the screen as shown next. The SIP extension number and any configured SIP
Auth. Password prefix and/or postfix make up the SIP password. The SIP password
must be at least four digits. This example uses ten four-digit SIP extensions 1001 - 1010
that are also used as the SIP usernames. The SIP passwords are comprised of the
combination of Prefix + Extension + Postfix. In this example, the SIP Auth. Password
X6004 User's Guide
Chapter 3 Tutorials
43