Table of Contents
Advertisement
When creating a new LCR, you must first configure the LCR Data portion of
the LCR configuration screen and press Apply before you can add a dial
condition.
Figure 170 LCR: Dial Condition
Each field is described in the following table.
Table 79 LCR: Dial Condition
LABEL
Dial Condition
LCR Name
Dial Condition
Number Pattern
Test
Dial Number
Viewer
X6004 User's Guide
DESCRIPTION
This field displays the name of the outbound dialing rule that this dialing condition
applies to.
Create the criteria for using this outbound dialing rule. The criteria can be
•
a specific number - for example "55555555"; in this case the number dialed by
users must match this string exactly.
•
any number starting with a specified pattern of digits - for example "0.", "555.",
"011." and so on; in this case the number dialed must match the digits before
the period "." and it doesn't matter what follows. For example dialing "0222-
2222" matches the dialing condition "0.".
You can also specify a range for digits within a dial condition. You can:
•
use the letters X, Z, N to specify a range of numbers to match. X represents
the range 0-9, Z represents the range 1-9 and N represents the range 2-9.
•
use brackets to specify an allowed range for a dialed digit. For example [0-8]
or [0-4, 6-9], in the second example 5 is not allowed.
Use the Right button to test if the dial condition is in acceptable format.
Note: You should make sure to create unique dial conditions for
each LCR. The X6004 is not able to distinguish between
LCRs if they have the same dial condition.
This field allows you to test whether a number dialed from one of the extensions
meets the criteria specified in the Dial Condition field.
Type a number you want to test and click the Right button. An O appears, if the
number you typed matches the dial condition. An X appears, if the number you
typed does not match the dial condition.
This field displays the phone number sent from the X6004 to this outbound line
group. You must click on an outbound line group in the Channel column of this
screen to view the number sent from the X6004 to the outside line.
Chapter 20 LCR
189
Advertisement
Table of Contents
