Setting Up Voicemail; Using The Web Phone (Ip Phone Users Only); Figure 64 Tutorial: Voicemail Tab; Figure 65 Tutorial: Setting Up Voicemail - ZyXEL Communications IP PBX X6004 User Manual

Chapter 4 Phone User Tutorial
6 Block Calls Without Caller ID: Ensure that Disable is selected.
7 Click Apply. Your call settings are successfully configured!

4.1.5 Setting Up Voicemail

Next, you can set up your voicemail inbox to automatically send your received messages as
audio files to your email inbox. It is recommended that you do this so that your voicemail
inbox does not fill up (if it fills up, no new messages can be recorded).
Click the Voice Mail tab at the top of the screen.

Figure 64 Tutorial: Voicemail Tab

The following screen displays.

Figure 65 Tutorial: Setting Up Voicemail

The following table shows the example voicemail settings. You can also use this table to make
a note of the voicemail settings you want to configure, if you like.

Table 6 Tutorial: Voicemail Settings

Received E-mail Address
(the address to which you want the
voicemail sent)
Attached Voice File
(send the audio file to your email
account)
Delete Voice Message After Mailed Yes
To configure this screen, enter your email address in the Received E-mail Address field,
select Attached Voice File and select Delete Voice Message After Mailed. Click Apply.

4.1.6 Using the Web Phone (IP Phone Users Only)

Click the Web Phone tab at the top of the screen.
70
EXAMPLE INFORMATION
user_abcd@examplecorp.com
Yes
YOUR INFORMATION
X6004 User's Guide