Anti-condensation Heater (for Mainframe Paper Tray)
3.
Connect the heater harness [A] to the anti-condensation heater and route it as shown below. (
3)
•
A: For the anti-condensation heater
•
B: For the junction harness
•
C: For the isolation cap (Not used)
•
D: Isolation cap
•
The connector [C] is not used. Put the connector into the opening.
4.
Put the mainframe on the table.
5.
Remove the rear cover.
6.
Remove the left cover.
88
(Rear
Cover)
(Left
Cover)
× 1,
×