1-Bin Tray BN1030 (D574-58)
4.
Attach the mounting frame [A]. (M3×10:
•
Install the screws in this order:
5.
Route the USB cable [A] on the mounting frame and fasten with the two clamps.
6.
Attach the 1-bin tray unit [A]. (M3x10: 4 screw, and blue screw [D])
Fasten the grounding wire [B] included in this kit with one screw as shown below. Fasten the other end of
the grounding wire with the screw [C].
× 8)
.
69