Ricoh MP C307 Field Service Manual page 408

UP/SP Data Import/Export
If you push the "Encryption" key, you
can export secret information.
7.
Press [Execute].
8.
Press [OK].
•
If data export fails, the details of the error can be viewed in the log.
Importing Device Information
Import device information saved on an SD card.
1. Insert an SD card into the media slot on the side of the control panel.
2. Enter SP mode.
3.
Do SP5-749-101(Import/Export: Import)
4. Select a unique setting.
5.
Press [Encryption Key], if the encryption key was created when the file was exported.
6. Select an encryption setting.
Unique If you want to apply the unique information to the target machine,
select the "Unique" key.
Encryption If an encrypted file is selected as the import file, this setting is
required.
7.
Press [Execute].
8. Press [OK].
•
If data export fails, the details of the error can be viewed in the log.
Possible Solutions for Import/Export Problems
The access log file is created when export/import is executed. The file is stored in the same location as the
exported device setting information file.
If an error occurs, check the log's result code in the access log file first. Values other than 0 indicate that an error
occurred.
The result code will appear in the circled area illustrated below.
- Example of a log file
402
•
Type the arbitrary password using the soft
keyboard
•
Can enter up to 32 characters
Refer to the above
information.