Ricoh MP C307 Field Service Manual page 380

Firmware Update (Auto Remote Firmware Update)
Situations judged as machine in use
No.
1 When the control panel is used within 30 seconds
2 During firmware update
3 While firmware update is disabled
4 While printing (copy, printer, fax, re-printing via network)
5 While scanning (copy, scanner, fax)
6 Retrieving image data via network
7 While initial setting (User Tools settings) or SP is being set
8 While fax is transferring data
9 During on hook / on handset
10 During the PC-FAX process (from PC to machine data transfer to the end of the job)
11 While shifting to/from the energy server mode
12 When not being able to run firmware update due to the modules that are running
e.g.) Waiting for DCS transfer (refer to appendix), accessing devices such as HDD/SD card, etc.
13 While displaying a preview
14 While the document server function is in use
15 Connecting to TWAIN
16 During the interrupt copy process
17 While displaying the printer menu
18 While updating the display for the document server function via WIM or for stored fax documents
19 While writing log information
20 While accessing the address book
21 During SC
Update Process
When the machine has decided to run the auto firmware update, the following message is displayed.
The popup will have "Cancel" and "OK" buttons and the update process will start either when the "OK" button
is selected or 30 seconds has passed.
374
Situations judged as machine in use