Installing A 3.5-Inch Hot Swappable Hard Drive Carrier Blank; Removing A Hot Swappable Hard Drive Carrier - Dell EMC NX430 System Owner's Manual

Figure 15. Removing and installing a 3.5-inch hot swappable hard drive carrier blank
1 hard drive carrier blank
Next step
If removed, install the front bezel.

Installing a 3.5-inch hot swappable hard drive carrier blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Follow the safety guidelines listed in Safety instructions section.
2 If installed, remove the front bezel.
Step
Insert the hard drive carrier blank into the hard drive slot, and push the hard drive carrier blank until the release button clicks into place.
Next step
If removed, install the front bezel.

Removing a hot swappable hard drive carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Follow the safety guidelines listed in Safety instructions section.
2 If installed, remove the front bezel.
3 Using the management software, prepare the hard drive for removal. For more information, see the documentation for the storage
controller.
If the hard drive is online, the green activity or fault indicator flashes when the hard drive is turned off. You can remove the hard drive
when the hard drive indicators turn off.
58 Installing and removing system components
2 release button