Installing A 3.5-Inch Hot Swappable Hard Drive Carrier Blank; Removing A Hot Swappable Hard Drive Carrier - Dell XC430 Owner's Manual

Figure 15. Removing and installing a 3.5-inch hot swappable hard drive carrier blank
1. hard drive carrier blank
Next steps
If removed, install the front bezel.

Installing a 3.5-inch hot swappable hard drive carrier blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive carrier blank into the hard drive slot, and push the hard drive carrier blank until
the release button clicks into place.
Next steps
If removed, install the front bezel.

Removing a hot swappable hard drive carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in Safety instructions section.
2. If installed, remove the front bezel.
2. release button
57