Log In To Idrac; Reinstalling The Nas Operating System By Using Dvd - Dell EMC NX430 System Owner's Manual

Log in to iDRAC

You can log in to iDRAC as:
• iDRAC user
• Microsoft Active Directory user
• Lightweight Directory Access Protocol (LDAP) user
The default user name and password are root and calvin. You can also log in by using Single Sign-On or Smart Card.
NOTE: You must have iDRAC credentials to log in to iDRAC.
For more information about logging in to iDRAC and iDRAC licenses, see the Integrated Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals.

Reinstalling the NAS operating system by using DVD

About this task
CAUTION: Back up the internal disk drives on your system before reinstalling or upgrading the NAS Operating System. The DVD
reinstall process formats or deletes the OS disks (virtual disk 0) resulting in loss of any data or installed applications. The DVD
reinstall process does not install RASR USB Recovery application.
Steps
1 Back up data that is stored on any internal disk drives or external storage arrays.
2 If required, connect the external USB DVD drive to your NAS system.
3 Insert your Dell Storage NAS Operating System resource media into your NAS system.
4 Restart your NAS system and ensure that your NAS system boots from the resource media.
The OS reinstallation begins and proceeds without any user intervention, if no errors are encountered. This process takes around 60 to
90 minutes to complete. Errors encountered are also flagged on the front panel LCD of your device. To resolve issues, see the Dell
Storage Network Attached Storage (NAS) Systems Troubleshooting Guide available at Dell.com/storagemanuals.
5 After reinstalling the OS, complete the initial configuration tasks.
NOTE: For information about the initial configuration tasks, see the Initial configuration of your NAS system section in
Dell Storage Network Attached Storage (NAS) Systems Running Windows Storage Server 2016 or 2012 R2
Administrator's Guide .
Initial system setup and configuration 25