Memory Specifications; Power Specifications; Drive Specifications - Dell EMC NX430 System Owner's Manual

PCI Express Specification
Generation 3
expansion slots
(without
expansion card
risers)
PCIE_G3_X8 One x8 link for riser

Memory specifications

Memory Specification
Architecture 1600 MT/s, 1866 MT/s, or 2133 MT/s DDR4 Unbuffered DIMMs
Support for advanced ECC or memory optimized operation
Memory module Four 288-pin sockets
sockets
Memory module 4 GB (single-rank), 8 GB (single- and dual-rank), 16 GB (single- and dual-rank)
capacities (UDIMM)
Minimum RAM 4 GB
Maximum RAM 64 GB

Power specifications

Power supply Specification
unit
Power rating per 350 W (Platinum) (100–240 V AC, 50/60 Hz, 4.8 A–2.4 A)
power supply unit
Heat dissipation 1357.1 BTU/hr
Voltage 100-240 V AC, autoranging, 50/60 Hz

Drive specifications

Drives Specification
Four hard drive
Up to four 3.5-inch hot swappable SAS, SATA, or Nearline SAS hard drives
systems
Optical drive One optional slim SATA DVD-ROM or DVD+/-RW drive.
20 Technical specifications
NOTE: Heat dissipation is calculated by using the power supply wattage rating.
NOTE: This system is also designed to be connected to IT power systems with a phase-to-phase voltage
not exceeding 230 V.
NOTE: For more information about PERC, see the Dell PowerEdge RAID Controller (PERC)
documentation at Dell.com/storagecontrollermanuals.