Installing Memory Modules - Dell EMC NX430 System Owner's Manual

CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory
module or metallic contacts.
2 To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module socket.
3 Lift and remove the memory module from the system.
Figure 13. Removing the memory module
1 memory module
3 memory module socket ejector (2)
Next steps
1 If you are removing the memory module permanently, install a memory-module blank.
2 Install the memory module.
3 Install the cooling shroud.
4 Follow the procedure listed in the After working inside your system section.

Installing memory modules

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or
metallic contacts on the memory module.
Steps
1 Locate the appropriate memory module socket.
2 memory module socket
Installing and removing system components 55