Removing The Optional Front Bezel; System Cover; Removing The System Cover - Dell EMC NX430 System Owner's Manual

3 Fit the free end of the bezel onto the system.
4 Lock the bezel by using the key.
Figure 8. Installing the optional front bezel
1 release latch
3 front bezel

Removing the optional front bezel

Prerequisite
1 Follow the safety guidelines listed in the Safety instructions section.
Steps
1 Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2 Unlock the bezel at the left end of the bezel.
3 Slide the release latch up and pull the left end of the bezel.
4 Unhook the right end, and remove the bezel.

System cover

The system cover protects the components inside the system and helps in maintaining air flow inside the system. Removing the system
cover actuates the intrusion switch which aids in maintaining system security.

Removing the system cover

Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
46 Installing and removing system components
2 lock