Dell EMC NX430 System Owner's Manual page 36

Option Description
Embedded SATA Enables the embedded SATA option to be set to Off, , AHCI, or RAID modes. This option is set to AHCI by default.
Security Freeze Sends Security Freeze Lock command to the Embedded SATA drives during POST. This option is applicable only
Lock for AHCI mode.
Write Cache Enables or disables the command for Embedded SATA drives during POST.
Port A
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Port B
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Port C
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Port D
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Port E
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
36 Pre-operating system management applications
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.