Idrac Direct Led Indicator Codes - Dell XC430 Owner's Manual

Drive-status indicator pattern
Blinks amber four times per second
Blinks green slowly
Steady green
Blinks green three seconds, amber three seconds,
and turns off six seconds

iDRAC Direct LED indicator codes

This topic describes about the iDRAC Direct LED indicator codes.
NOTE: The iDRAC Direct LED indicator does not glow for the USB mode.
Figure 4. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
The following table displays iDRAC Direct activity when configuring iDRAC Direct by using the
management port (USB XML Import).
Table 6. iDRAC Direct by using the management port (USB XML Import).
Convention iDRAC Direct
LED indicator
pattern
A Green
B Flashing green
C Green and turns
off
D Not lit
14
Condition
Drive failed
Drive rebuilding
Drive online
Rebuild aborted
Condition
Glows green for a minimum of two seconds at the beginning and
end of a file transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is
complete.