Table of Contents
Advertisement
Interfaces
Document/Section
iDRAC Direct and
See Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals
Quick Sync 2
(optional)
NOTE:
To access iDRAC, ensure that you connect the Ethernet cable to the iDRAC direct port. You can also access iDRAC
through the shared LOM mode, if you have opted for a system that has the shared LOM mode enabled.
Log in to iDRAC
You can log in to iDRAC as:
● iDRAC user
● Microsoft Active Directory user
● Lightweight Directory Access Protocol (LDAP) user
If you have opted for secure default access to iDRAC, the iDRAC secure default password is available on the back of the system
Information tag. If you have not opted for secure default access to iDRAC, then the default user name and password are root
and calvin. You can also log in by using Single Sign-On or Smart Card.
NOTE:
You must have the iDRAC credentials to log in to iDRAC.
NOTE:
Ensure that you change the default user name and password after setting up the iDRAC IP address.
For more information about logging in to the iDRAC and iDRAC licenses, see the latest Integrated Dell Remote Access Controller
User's Guide at Dell.com/idracmanuals.
You can also access iDRAC by using RACADM. For more information, see the RACADM Command Line Interface Reference
Guide at Dell.com/idracmanuals.
Methods to download firmware and drivers
You can download the firmware and drivers by using any of the following methods:
Table 33. Firmware and drivers
Methods
From the Dell Support site
Using Dell Remote Access Controller Lifecycle Controller
(iDRAC with LC)
Downloading drivers and firmware
Dell EMC recommends that you download and install the latest BIOS, drivers, and systems management firmware on your
system.
Prerequisites
Ensure that you clear the web browser cache before downloading the drivers and firmware.
Steps
1. Go to Dell.com/support/drivers.
2. In the Drivers & Downloads section, type the Service Tag of your system in the Enter a Service Tag or product ID box,
and then click Submit.
NOTE:
If you do not have the Service Tag, select Detect Product to allow the system to automatically detect your
Service Tag, or click View products, and navigate to your product.
3. Click Drivers & Downloads.
Location
Dell.com/support/home
Dell.com/idracmanuals
Initial system setup and configuration
29
Advertisement
Table of Contents
