Installer Settings - Daikin EPRA16DAW1 Installer's Reference Manual

9 | Configuration

9.5.9 Installer settings

Installer reference guide
178
Dealer information
The installer can fill in his contact number here.
# Code
[8.3] N/A
Reset
Reset the configuration settings stored in the MMI (user interface of the indoor
unit).
Example: Energy meterings, holiday settings.
INFORMATION
This does not reset the configuration settings and field settings of the indoor unit.
#
[8.A]
Possible read-out information
In menu...
[8.1] Energy data
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
[8.8] Connection status
[8.9] Running hours
Overview
The following items are listed in the submenu:
Number that users can call in case of problems.
Code
N/A
Produced energy, consumed electricity,
and consumed gas
Malfunction history
Contact/helpdesk number
Room, tank or domestic hot water,
outside, and leaving water temperature
(if applicable)
Status/mode of each actuator
Example: Domestic hot water pump
ON/OFF
Current operation mode
Example: Defrost/oil return mode
Version information about the system
Information about the connection
status of the unit, the room thermostat
and the LAN adapter.
Running hours of specific system
components
Description
Description
Reset the MMI EEPROM
to factory default
You can read out...
EPRA14~18DAV3+W1 + ETBH/X16DA6V+9W
Daikin Altherma 3 H HT W
4P587501-1A – 2020.01