12 Maintenance and service
In this chapter
12.2 Maintenance safety precautions
EPRA14~18DAV3+W1 + ETBH/X16DA6V+9W
Daikin Altherma 3 H HT W
4P587501-1A - 2020.01
NOTICE
General maintenance/inspection checklist. Next to the maintenance instructions in
this chapter, a general maintenance/inspection checklist is also available on the
Daikin Business Portal (authentication required).
The general maintenance/inspection checklist is complementary to the instructions
in this chapter and can be used as a guideline and reporting template during
maintenance.
NOTICE
Maintenance MUST be done by an authorized installer or service agent.
We recommend performing maintenance at least once a year. However, applicable
legislation might require shorter maintenance intervals.
12.1
Overview: Maintenance and service...................................................................................................................................... 215
12.2
Maintenance safety precautions............................................................................................................................................ 215
12.3
Yearly maintenance ................................................................................................................................................................ 216
12.3.1
12.3.2
12.3.3
12.3.4
12.4
12.4.1
To remove the water filter..................................................................................................................................... 219
12.4.2
12.4.3
To install the water filter........................................................................................................................................ 221
This chapter contains information about:
▪
The yearly maintenance of the outdoor unit
▪
The yearly maintenance of the indoor unit
DANGER: RISK OF ELECTROCUTION
DANGER: RISK OF BURNING
NOTICE: Risk of electrostatic discharge
Before performing any maintenance or service work, touch a metal part of the unit in
order to eliminate static electricity and to protect the PCB.
12
Maintenance and service
|
Installer reference guide
215