Daikin EPRA16DAW1 Installer's Reference Manual page 198

9 | Configuration
Forced defrost
Overview field settings
Export MMI settings
Installer reference guide
198
# Code
[9.F] [E‑08]
Forced defrost
Manually start a defrost operation.
# Code
[9.H] N/A
NOTICE
Forced defrost start-up. You can only start forced defrost when the heating
operation has been running for a while.
All settings can be done using the menu structure. If for any reason it is required to
change a setting using the overview settings, then the overview settings can be
accessed in the field settings overview [9.I]. See
4
setting" [ 121].
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
# Code
[9.N] N/A
To export MMI settings
1 Open the front panel (1) and the user interface panel (2) (see
"6.2.5 To open the indoor
1
2
Description
Power saving function for outdoor unit:
▪ 0: No
▪ 1: Yes
Description
Do you want to start a defrost operation?
▪ Back
▪ OK
Description
Your MMI settings will be exported
to the connected storage device:
▪ Back
▪ OK
4
unit" [ 65]):
"To modify an overview
—
EPRA14~18DAV3+W1 + ETBH/X16DA6V+9W
Daikin Altherma 3 H HT W
4P587501-1A – 2020.01