Installer Settings - Daikin EWYA004D2V3P Installer's Reference Manual

11.6.8 Installer settings

EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688013-1B – 2022.09
Example: Energy meterings, holiday settings.
INFORMATION
This does not reset the configuration settings and field settings of the hydro module
of the outdoor unit.
#
[8.A]
Possible read-out information
In menu...
[8.1] Energy data
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
[8.8] Connection status
[8.9] Running hours
Overview
The following items are listed in the submenu:
Code
N/A
Produced energy, consumed electricity,
and consumed gas
Malfunction history
Contact/helpdesk number
Room temperature, outside
temperature, leaving water
temperature,...
Status/mode of each actuator
Example: Unit pump ON/OFF
Current operation mode
Example: Defrost/oil return mode
Version information about the system
Information about the connection
status of the unit, the room thermostat
and WLAN.
Running hours of specific system
components
11 Configuration
|
Description
Reset the MMI EEPROM
to factory default
You can read out...
Installer reference guide
161