Setting the Sales Message Start and Stop Times
To program the Sales message start time setting
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 3, press the number of seconds you
To program the Sales message stop time setting
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 4, press the number of seconds
Setting the Idle Messages Start Time
Alpha 600/601 User's Guide
SALES message
Number of seconds after a sale is
start
complete before the message
starts.
The register must be set in REG
mode.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
want to delay as 2 digits, and press the Charge key.
SALES message
Number of seconds the Sales
stop
message runs before the Idle
message starts.
The register must be set in REG
mode.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
you want to delay as 2 digits, and press the Charge key.
Idle message
Number of seconds for the Time
display after the
to appear before the Idle
time appears
message appears again.
When the Time changes while an
Idle message is running, the time
appears for a few seconds. After
the specified time, the Idle
message appears again.
Programming Scrolling Message Display Times
Settings in
seconds: 00 – 99
Default=10
Settings in
seconds: 00 – 99
Default=20
00 = No Sales
message appears
Settings in
seconds: 0 – 9
0 does not show
the time at all.
Default=5
53