Setting The Decimal Points - Royal 601sc Instruction Manual

Important
If you enter the wrong character, press the Void key to backspace and delete
that character and then continue.
7 Press the Check key. The PLU information is saved in the cash register.
8 Repeat steps 4 through 7 to program more PLUs.
9 When you are done programming PLUs, press the Qty/Date key.

Setting the Decimal Points

The decimal point is set by selecting from the following 4 options:
After you program the decimal point, you do not need to specify a decimal
when you ring up sales. If you try to use a decimal point, you hear an error
beep.
After you are done, you can check your results. See Running the Program
Confirmation Report on page 80.
To program the decimal points
Example 14: Program the Decimal Point For Option $X.XX, 2 decimal places,
normally used in the United States
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 2 and then press the -%/RA key.
Alpha 600/601 User's Guide
This decimal point...
zero decimal point
one decimal point
two decimal point
three decimal point
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Looks like...
0 = $ X
1 = $ X.X
2 = $ X.XX (U.S. Standard)
3 = $ X.XXX
Setting the Decimal Points
59