Using Training Mode - Royal 601sc Instruction Manual

Using Training Mode

We provide examples to help learn how to use this cash register. For
information about the examples, see Examples on page 104. Using the
examples can help you learn to use the cash register and the available
features.
You can start Training mode at any time because it does not record
activity in the machine totals.
When you are using the cash register in Training mode, you cannot use
any of the operations in the PRG, X, or Z modes. The transaction numbers
and amounts do not count in the Register mode until you stop Training
mode.
When the cash register is in Training mode, asterisks **** print instead of
transaction numbers. When you stop Training mode, the transaction
numbers continue from the last number printed before you entered
Training mode.
When the cash register is in Training mode, a small light appears in the
left digit of the Clerk display. Some transactions may also print DEMO on
the receipt.
To start Training mode
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 666666 and then press the
4 Now you can move the Mode key to the REG1 or REG2 position so
To stop Training mode
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 555555 and then press the
4 Now you can move the Mode key to the REG1 or REG2 position and
Alpha 600/601 User's Guide
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Amount Tend Total key.
training can start.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Amount Tend Total key.
use the cash register.
Using Training Mode
75