Error Codes; Clearing An Error - Royal 601sc Instruction Manual

Chapter 4: Setting Up Your Cash Register - the Basics

Error Codes

Your cash register makes beeps as well as shows you messages in the
display. Some beeps and messages let you know everything is working
and others let you know you need to do something.
Table 8 Common errors

Clearing an Error

The Clear key stops an alarm beep that happened because a key was
pressed that was not correct for that operation.
The Clear key does not erase a transaction that was registered by an
operating key and printed on the register tape.
To erase an entry after you press a key that printed the entry on the tape,
use the Void key to correct the error.
If the cash register makes a loud error beep, press the Clear key to stop it.
38
This error...
Register Beep
Entry Error Beep
Printer Error or Paper
End
Means this...
The cash register makes a short beep each
time a key is pressed. This is normal and not a
cause for concern.
When using your cash register, you must
perform all operations in the correct order. If
you press the wrong key at the wrong time, an
alarm beep sounds and you see a message on
the display. The keyboard also locks. Press the
Clear key to continue.
When a transaction is started in the REG1 or
REG2 position, you must complete the sale
before moving the Mode key to another
position. When an operation is started but not
finished in the REG1 or REG2 positions,
turning the Mode key to another position
makes an alarm beep and you see an error
message on the display. Press the Clear key to
continue.
If a PE appears in the display, check if you are
out of paper. Check for a paper jam. For more
information about other solutions, see PE
Printer Error or Paper End on page 99.
Alpha 600/601 User's Guide