Setting The Amount Of Time Message Letters Appear In The Display - Royal 601sc Instruction Manual

Chapter 5: Setting Up Your Cash Register - Advanced
To program the Idle message display after the time appears
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 50, press the number of seconds
To program the Idle message display pattern
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 60, press 0 or 1 for your message

Setting the Amount of Time Message Letters Appear in the Display

You can set the amount of time letters appear in the display. The shorter
amount of time, the faster the message scrolls across the display.
To program the amount of time letters appears
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
54
and then press the Check key. If you did not program a Manager
Password, go to the next step.
you want to delay as 1 digit, and press the Charge key.
Idle message Setting the Idle message to 0
pattern runs Idle message 1 in the AM
and Idle message 2 in the PM.
Setting the Idle message to 1
combines both Idle messages
and runs them all day.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
display choice, and press the Charge key.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Settings: 0 – 1
Default=0
Alpha 600/601 User's Guide