Programming Plus Without A Barcode Reader - Royal 601sc Instruction Manual

3 Link the PLU to a department key with the appropriate Tax Status for
4 Enter a description for the PLU. You must enter a description, even if it
For example, if PLU #1 is a taxable item, you can link it to a Department
key which is set up for tax. If PLU #2 is not a taxable item, you can link it
to a Department key which is programmed for no tax.
Important
You do not need to press the decimal point key when entering a price.
After you are done, you can check your results. See Running the PLU
Confirmation Report on page 82.

Programming PLUs without a Barcode Reader

You can program PLUS without using a barcode reader. Use the following
instructions.
To program PLUs without a barcode reader
Example 12: Set PLU #1 with a $2.99 price, linked to Department 1, description
of APPLE
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Press the Qty/Date key to begin programming the PLUs. The PLU
4 Using the round Number keys, press 1 and press the PLU key.
5 Using the round Number keys, press 299 and then press the
6 Press the keys to spell APPLE, using the Alphanumeric keys or the
Alpha 600/601 User's Guide
that PLU.
is as simple as PLU4.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
prompt appears on the display.
Department 1 key. For more information about using the department
keys, see Assigning Department Number Keys on page 46.
Alphanumeric Code Chart, if needed. For an explanation of how to use
the Department keys to spell words, see Setting Alphanumeric
Descriptions on page 23. The Department Shift key lets you use the
letters in the lower green area on the Department keys.
To make a space to separate words, press the round Number 0 key twice
or press the round Number 00 key one time.
You must enter a description, even if it is as simple as PLU4.
Programming PLU Descriptions
57