Programming Plus With The Barcode Reader - Royal 601sc Instruction Manual

Chapter 5: Setting Up Your Cash Register - Advanced
Important
If you enter the wrong character, press the Void key to backspace and
delete that character and then continue.
7 Press the Check key. The PLU information is saved in the cash register.
8 When you are done programming PLUs, press the Qty/Date key.

Programming PLUs with the Barcode Reader

You can use the barcode reader to scan items and automatically ring them
up. Using the barcode reader reduces errors caused by people ringing up
items incorrectly. The barcode reader must be held about ½ inch or closer
above the UPC symbol on the product to read the UPC symbol properly.
To program PLUs using the barcode reader
Example 13: Set a UPC symbol to a $2.99 price, linked to Department 1,
description of BOOK
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Press the Qty/Date key to begin programming the PLUs.
4 Using the barcode reader, scan the UPC you want for this PLU. Hold
5 Using the round Number keys, press 299 and then press the
6 Press the keys to spell BOOK, using the Department keys or the
58
If you want to program more PLUs, repeat steps 4 through 7.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
the barcode reader less than ½ inch from the UPC you want to scan.
Press the button on the bottom of the reader to read the UPC. The
barcode reader beeps.
Department 1 key. The PLU name appears on the display. For more
information about using the department keys, see Assigning Department
Number Keys on page 46.
Alphanumeric Code Chart, if needed. For an explanation of how to use
the Department keys to spell words, see Setting Alphanumeric
Descriptions on page 23. The Department Shift key lets you use the
letters in the lower green area on the Department keys.
To make a space to separate words, press the 0 key twice or press the 00
key one time.
You must enter a description, even if it is as simple as PLU4.
Alpha 600/601 User's Guide