To Reset The Z1/Z2 Counter; To Print Department Range Report; Running An Hourly Report - Royal 601sc Instruction Manual

Royal alpha 601sc pos: instruction manual
Table of Contents

Advertisement

To reset the Z1 counter
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press 1 and then press the Z1 Counter
To reset the Z2 counter
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press 2, then press the Z2 Counter
To reset the grand total
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press 777777 and press the Amount
To print a Department Range report
1 Put the PRG key in the Mode key slot and turn it to the X position.
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press the Starting Department

Running an Hourly Report

The report shows the number of sales and the total sales amount for each
hour. All hours print, even if no sales were made in an hour. Times print
using a 24 hour format.
Alpha 600/601 User's Guide
and then press the Check key. If you did not program a Manager
Password, go to the next step.
starting number as 4 digits (for example 0001) and then press the Return
key.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
starting number as 4 digits (for example 0001) and press the Return key.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Tend Total key. Enter the new amount (up to 12 digits) and press the
Non Tax key.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
number as 2 digits (for example 01). Press the Ending Department
number as 2 digits and then press the Amount Tend Total key.
Running Management Reports
89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alpha 600Alpha 601

Table of Contents