Programming The Credit Keys - Royal 601sc Instruction Manual

3 Using the round Number keys, press 70. Press one digit number from

Programming the Credit Keys

You can use 2 department keys as credit card-only keys. You can use one
or both keys if you want. For example, you can set Department 19 to be a
Visa® card and Department 20 to be a MasterCard®. You can also
program the cash register to print the name of the credit card on the
receipt or journal tape.
When you ring up a sale, you can use Department 19 or Department 20 to
finalize the credit card sale, open the cash drawer, and print the receipt or
journal tape.
You must set Flag 16 Option Number 1, 2, or 3 to use this feature. For
more information about setting Flags, see Programming Flag Options on
page 65.
Note
If you want to use Departments 19 and 20 as credit card keys, they no longer
work as department keys until you set Flag 16 back to 0.
To program a credit key
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
Alpha 600/601 User's Guide
the chart below, representing the number of seconds you want to delay,
and press the Charge key.
Press this number...
0
1
2
3
4
5
6
7
8
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Programming the Credit Keys
To specify...
0.2 seconds Fast
0.3
0.4 -
Default
0.5
0.6
0.7
0.8
0.9
1.0 Slow
55