Quick Start - Royal CMS482 PLUS Operating Instructions Manual

QUICK START
CMS482 PLUSjCMS487 PLUS
The Quick Start Program Is designed to help you quickly "gel started" wilh the basics you need to run your cash
register. It covers programming the Declmal Polnl. Rounding, Dale, Time, Tax Rate, and DepartmenlS lor laxing
Or
non-taxing. Follow the Quick Start slralghl through, however, skip any steps which are not required by your
business needs. In going through the Quick Start, If an error tone sounds, press the Clear (C) Key and continue
by repeating the slep you are attempllng to program.
NOTE: It is not necessary 10 repeat the entire Quick Start Program if yoU wish to update or change a step
at any time. Therefore, maintain your owner's manual in a safe place for all future programming.
1. Read "Getting to Know Your Cash Register" and "InSlali Paper RoJr(see pages 1-7).
2. Turn the Manager Key In the Control Lock to the 'PRG" (Program) posilio(l.
3. PresS (AMT TENDrrOTAL) 10 generate a check lape.
4.
To .set the DECIMAL POINT (2 piaces, normally used in the U.S.) and the "THANK YOU CALL AGAIN" stamp:
Type (1), press (PO), type (6). press (AMT TEND/TOTAL), then press (#/ST/NS).
Important; In the "REG" (Register) mode, it Is nol necessary to press the decimal point when
ringing up a price.
5. To sel the lormat tor printing the DATE and TIME:
Type (2). press (PO), type (1), press (AMT TEND/TOTAL), then press (#/ST/NS).
6. To set the DATE (use Year·Month·Day lormat). Note: The date will print Month-Day-Year In the "REG'
(Register) mode. Example, to set May 27, 1991:
Type (1), press (OTY/TIME). type (9)(1)(0)(5)(2)(7), then press (AMT TEND/TOTAL),
7. To set the CURRENT TIME (use military time). Example,
10
set 9:00 a.m.:
Type (2), press (OTY /TIME). type (0)(9)(0)(0). then press (AMT TENDfTOTAL).
Reminder: To convert to military time, add the number' 2 to every hour after 12:00 noon: Le ..
to set 3:15 p.m., type (1515).
Ba. To set a DEPARTMENT lor CHARGING TAX. E)(ample~ program (DEPARTMENT 1) for charging lax:
Press (DLU/ AL T). type (0)(0) (0)( 1). then pre!ls (OEPARTMENT 1) .
• Repeal (PLU/ALT) (0)(0)(0)(1) belore every department you want to charge tax.
Bb. To set a DEPARTMENT for CHARGING NO TAX. Example, program (DEPARTMENT 2) for charging no tax:
Press (PLU/ AL T). type (0)(0) (0)(0). then pres! (DEPARTMENT 2) .
• , Repeat (PLU / AL T) (O)(O)(O}(O) before every department you want 10 charge no tax.
9a. To set the TAX RATE. Example. II your tax rate is 5%:
Type (1)(1), press (OTY/TIME). type (5), then press (AMT TEND/TOTAL).
Note: II, for example, your lax rate is 7.5% then type (7.5).
9b. To set the ROUNDING to the 5th place (normally used in the U,S.):
Type (9), press (PO). type (5), press (AMT TEND/TOTAL), then press (#/ST/NS),
B