Setting The Mode Message; Setting The Sales Message Start And Stop Times - Royal Alpha 583cx User Manual

Chapter 5: Setting Up Your Cash Register - Advanced

Setting the Mode Message

To program the Mode message time setting
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 2, press the number of seconds you

Setting the Sales Message Start and Stop Times

To program the Sales message start time setting
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 3, press the number of seconds you
44
abcoffice
MODE message Number of seconds before the
register turns into idle mode in
PRG, X, Z modes and the
message starts.
This message does not display in
REG modes.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
want to delay as 2 digits, and press the Charge key.
SALES message Number of seconds after a sale is
start complete before the message
starts.
The register must be set in REG
mode.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
want to delay as 2 digits, and press the Charge key.
SALES message Number of seconds the Sales
stop message runs before the Idle
message starts.
The register must be set in REG
mode.
www.abcoffice.com
Settings in
seconds: 00–99
Default=05
Settings in
seconds: 00 – 99
Default=10
Settings in
seconds: 00 – 99
Default=20
00 = No Sales
message appears
Alpha 583cx User's Guide
1-800-658-8788