Confirmation Tone - Panasonic KX-NS700 Feature Manual

•
If 7 members of a Broadcast Mode call already have the ability to speak enabled, PS users cannot use
the push-to-talk feature.
•
If a member uses push-to-talk to enable the ability to speak during a Broadcast Mode call, the member
cannot disable this ability. They can mute their microphone manually, or the originator of the call can use
conference group call control to disable their ability to speak.
•
Since each PS requires one wireless channel, note your PBX's wireless capacity when assigning multiple
PSs to a conference group.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—Conference Group Call—
Ring Duration (s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—Conference Group Call
Operation
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Miscellaneous—Conference
Group Call Operation
10.9 PBX Configuration—[2-9] System—System Options—Option 8—Conference Group—Maximum
Number of Speakers During a Conference Group Call
11.9 PBX Configuration—[3-9] Group—Conference Group
→Broadcast Mode
→Ability to Talk
→Automatic Answer w/o Extension Setting
11.9.1 PBX Configuration—[3-9] Group—Conference Group—Member List
Feature Manual References
9.1.1 Hands-free Answerback
23.1 Capacity of System Resources
Operating Manual References
1.3.17 Conference Group Call

4.1.20 Confirmation Tone

Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation
tone to extension users.
Type
Tone 1
Tone 2
Document Version 2017-06
a.
Sent when the setting is accepted.
b.
Sent when a call is received in voice-calling mode (Alternate Receiving—
Ring/Voice). The caller's voice will be heard after the tone.
a.
Sent from an external paging device or an extension before being paged.
b.
Sent when a call is received while an extension is in Hands-free
Answerback mode.
Description
4.1.20 Confirmation Tone
Feature Manual 77