Fwd (Call Forwarding) - Panasonic KX-NS700 Feature Manual

–
Link Setup
–
Station Message Detail Recording/Call Charge Posting
–
Room Status
–
Minibar Charge Posting
–
Wakeup Confirmation OK/NG
–
Message Waiting On/Off
–
Do Not Disturb Set/Clear
•
When a Change Cos command is received from the FOS system, the built-in FOS interface converts the
COS number from the FOS system to an internal COS number as follows:
COS number (FOS)
COS number (PBX)
•
If communication with the FOS system is interrupted, the PBX will record data on SMDR. When
communication is re-established, the PBX will send the recorded data to the FOS system.
PC Programming Manual References
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site—Port Number

7.1.7 FWD (Call Forwarding)

Description
Extensions and incoming call distribution groups can forward their calls to preset destinations. There are
several different types of forwarding, and the circumstances under which the calls are forwarded for each
type differ as follows:
Type
All Calls
Busy
No Answer
Busy/No Answer
Depending on the type of incoming intercom or CO line calls, it is possible to set a different destination for
each.
Document Version 2017-06
0
1
Any time
Follow Me:
When an extension user fails to set this feature before leaving the desk,
this feature can be set from the destination extension.
When the extension user's line is busy.
When the extension user does not answer within a preprogrammed
time.
When the extension user's line is busy or the user does not answer
within a preprogrammed time.
7.1.7 FWD (Call Forwarding)
1 2
2 3
Circumstance
3
4
Feature Manual 145