Display Information - Panasonic KX-NS700 Feature Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-NS700:
- Feature manual (580 pages) ,
- User manual (394 pages) ,
- Operating manual (362 pages)
Table of Contents
Advertisement
1.3.75 Walking COS
5.1.11 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or
receiving calls:
Display Item
The extension number and name of the
calling or called extension, or Incoming Call
Distribution (ICD) Group
Status of the called extension
The number and name of the optional device
The telephone number dialed
The received call information
a.
Caller's name
b.
Caller's number
c.
CO line number/name
d.
Original Destination, if the call is
forwarded
e.
DID name
Duration of the current CO line call
Conditions
•
Multilingual Display
Each extension can select its display language through personal programming (Display Language
Selection).
•
Display Contrast
The display contrast can be adjusted through personal programming (Display Contrast Selection). This is
available only for digital proprietary telephones (DPTs) and IP proprietary telephones (IP-PTs).
•
Display Backlight
Some extensions can select whether to turn the display backlight on or off through personal programming
(Display Backlight Selection). For details, refer to the manual for your telephone.
•
Characters (name) or digits (number) exceeding the display's limitations are not displayed. Although in
this case information may not be displayed properly, the received information is not altered.
PC Programming Manual References
10.9 PBX Configuration—[2-9] System—System Options—Option 5—PT Feature Access—No. 1–8
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Option 5—Display Language
→Option 5—Incoming Call Display
→Option 5—Automatic LCD Switch when Start Talking
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
→Option 5—Display Language
→Option 5—Incoming Call Display
→Option 5—Automatic LCD Switch when Start Talking
Document Version 2017-06
Display Example
123: Tom Smith
123: Busy
D02: 1st Door
1234567890
ABC Company
12345678
Line 001: Sales
→102:Mike
Panasonic*
Line 001 11:02'28
5.1.11 Display Information
Condition
–
–
–
–
The first line message can
be either (a), (c), or (e) at
each extension through
system programming.
These can be displayed in
turn by pressing the
TRANSFER button or
DISP Soft button during a
call.
–
Feature Manual
105
Advertisement
Table of Contents
