Panasonic KX-NS700 Feature Manual page 304

15.1.23 Private Network Features—QSIG—Enhanced Features
Feature
Do Not Disturb (DND)
Hands-free Answerback
Internal Call Block
During a Call with Another Party
Feature
Transfer to Busy Extension using
Queuing (Camp-on Transfer)
For Incoming Calls to an Extension on Another Networked PBX
Feature
Directed Call Pickup
Conditions
•
KX-NSN002 (Activation Key for QSIG Network) is required for each Master unit to use these features.
Furthermore, all PBXs in the network must be KX-NS series PBXs, or KX-NCP/KX-TDE series with MPR
Software Version 4.1000 or later.
•
A separate activation key is required for non-KX-NS series PBXs. For details, refer to the corresponding
Feature Manual.
•
Enhanced QSIG features can be disabled at the TIE Table level through system programming.
•
Calls made by accessing a CO line via an S-CO button or Trunk Group Access feature number, etc.
cannot use enhanced QSIG features because they do not refer to the TIE Table. This includes calls made
from the call history of Communication Assistant (CA) because such calls specify a trunk group directly.
•
Calls forwarded using CF (Call Forwarding) by QSIG cannot use enhanced QSIG features.
•
Leave Message Waiting
304 Feature Manual
Description and Reference
Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to DND settings.
The Boss and Secretary feature will also function over a network.
→ 5.1.13 DND (Do Not Disturb)
Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to Hands-free Answerback settings.
The Class of Service with Hands-free Answerback feature will
also function over a network.
→ 9.1.1 Hands-free Answerback
Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to the Internal Call Block feature.
For example, only branch office managers can be allowed to call
the president at the main office, but other extensions in the branch
office cannot call the president.
→ 10.1.15 Internal Call Block
→ 4.1.22 COS (Class of Service)
Description and Reference
You can transfer a call over the network to a busy extension in
another PBX without having to use a Call Waiting operation.
→ 4.1.10 Call Transfer
Note
Call Transfer over a network is also supported as a standard
QSIG feature. (→ 15.1.22 Private Network Features—QSIG—
CT (Call Transfer))
Description and Reference
An extension user can answer a call ringing at another networked
PBX extension.
→ 4.1.8 Call Pickup
Document Version 2017-06