Confirmation Tone - Panasonic KX-TDA30 Features Manual

1.28 Audible Tone Features

1.28.2 Confirmation Tone

Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation
tone to extension users.
Type
Tone 1
Tone 2
Tone 3-1
Tone 3-2
Tone 4-1
Tone 4-2
Tone 5
Conditions
• Confirmation Tone Patterns
All confirmation tone patterns have a default (→ 4.2.1 Tones/Ring Tones).
• It is possible to eliminate each tone.
256 Feature Guide
a)
Sent when the setting is accepted.
b)
Sent when a call is received in voice-calling mode (Alternate
Receiving—Ring/Voice). The caller's voice will be heard after the
tone.
a)
Sent from an external paging device or an extension before being
paged.
b)
Sent when a call is received in Hands-free Answerback mode.
a)
Sent before a conversation is established when using the Paging
feature.
b)
Sent when a conversation is established with the extension in the
following modes after the call making operation:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving—Ring/Voice)
Sent just before a conversation is established when accessing the
following features by the feature numbers:
• Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
• TAFAS
Sent when moving from a two-party call to a three-party call. (e.g.,
Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Sent when moving from a three-party call to a two-party call. (e.g.,
Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Sent when a call is placed on hold (including Consultation Hold).
Description