Doorphone Call - Panasonic KX-NS700 Feature Manual

4.9 Connecting to a Doorphone, Door Opener, and/or External Sensor
PC Programming Manual References
9.28 PBX Configuration—[1-1] Configuration—Slot—DOORPHONE Card—Card Property—For Output -
Device Type
10.3 PBX Configuration—[2-3] System—Timers & Counters—DISA / Door / Reminder / U. Conf—
Doorphone—Open Duration (s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—Door Open
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Optional Device & Other
Extensions—Door Unlock
PT Programming Manual References
[207] Door Unlock Time
[512] Permission for Door Open Access
Feature Manual References
4.1.22 COS (Class of Service)
Operating Manual References
1.3.21 Door Open

5.1.15 Doorphone Call

Description
A visitor can use a doorphone to call its preprogrammed destination. Extension users can call a doorphone.
Conditions
•
Hardware Requirement:
An optional doorphone and a DPH2 card
•
Call Destination
The destination of doorphone calls can be assigned to each doorphone port for each time mode. The
Time Table is determined by the tenant number assigned to each doorphone port. (→ 19.1.3 Time
Service)
DISA cannot be the destination for doorphone calls.
•
Class of Service (COS) programming determines the doorphone ports that are able to make an outgoing
CO line call.
•
Internal Call Block determines which extensions can call a doorphone. (→ 10.1.15 Internal Call Block)
•
Ring Duration
If an incoming doorphone call is not answered within a preprogrammed time period, ringing stops and the
call is canceled.
•
Call Duration
The duration of doorphone calls can be restricted by a system timer. If the timer expires, the call will be
disconnected.
•
Door Open
While engaged on a doorphone call, an extension user can unlock the door to let the visitor in. (→
5.1.14 Door Open)
•
A doorphone number can be referenced for each doorphone port.
•
For KX-UT670 users
Document Version 2017-06
5.1.15 Doorphone Call
Feature Manual 109