Private Network Features-Qsig - Panasonic KX-NS700 Feature Manual

15.1.18 PRIVATE NETWORK FEATURES—QSIG
•
When a PS comes within range of a certain PBX, Out of Range status is automatically released.
However, in some negative wireless network conditions, Out of Range status may not be released
automatically. In this case, the PS user can manually release Out of Range status by pressing the Talk
key and confirming that a dial tone can be heard from the PBX.
•
If the status of a PS is set to Out of Range at all PBXs that it is registered to, the call will be redirected to
the overflow destination of the ICD Group.
•
Handover from one PBX to another PBX during a conversation is not possible.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—System Wireless—PS Out of
Range Timer (s)
10.9 PBX Configuration—[2-9] System—System Options—Option 4—System Wireless—Out of Range
Registration
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main
→Floating Extension Number
→Distribution Method
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 9—Mobile
Extension
Feature Manual References
10.1.4 ICD Group Features—Outside Destinations
15.1.18 PRIVATE NETWORK FEATURES—QSIG
Description
QSIG is a protocol which is based on ISDN (Q.931) and offers enhanced PBX features in a private network.
The QSIG network supports private communications by the TIE line service method.
The following features are available for an ISDN-QSIG or VoIP private network. For ISDN, system
programming is required to specify whether each feature (excluding Calling Line Identification Presentation
[CLIP]) is available for each port of the private network.
[Standard Service Table]
Service
Calling Line Identification
Presentation (CLIP)
Connected Line Identification
Presentation (COLP)
296 Feature Manual
Description & Reference
Sends the caller's number to the QSIG network when making a call.
→ 15.1.21 Private Network Features—QSIG—CLIP/COLP (Calling/
Connected Line Identification Presentation) and CNIP/CONP (Calling/
Connected Name Identification Presentation)
Sends the number of the answered party to the QSIG network when
answering a call.
→ 15.1.21 Private Network Features—QSIG—CLIP/COLP (Calling/
Connected Line Identification Presentation) and CNIP/CONP (Calling/
Connected Name Identification Presentation)
Document Version 2017-06