Panasonic KX-NS700 Feature Manual page 35

•
When the caller ID is blocked for an incoming external call or when the telephone number is unknown for
other reasons, the call charge displayed will be 0.
•
To use Automatic Call Charge Calculation feature, "a combination of Activation Keys 1 (either one is OK)
and 2" or "Activation Key 3" will be required.
When the required activation key(s) is not installed, the result of automatic call charge calculation will be
0.
Activation Key1
Activation Key2
Activation Key3
PC Programming Manual References
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialing Plan
→Charge—Apply charge calculation for incoming calls
→Charge—Flat Charge
→Charge—Flat Charge Duration (s)
→Charge—Unit Charge
→Charge—Unit Charge Duration (s)
Feature Manual References
10.1.8 ICD Group Features—Supervisory Feature (ACD)
18.1.7 SMDR (Station Message Detail Recording)
Document Version 2017-06
Call Center Feature Enhancement (KX-NSF201) or Built-in ACD report
(KX-NSXF022)
Enhanced Built-In ACD Report (KX-NSXF023)
Call Statistics Report (KX-NSXF202)
2.1.8 Automatic Call Charge Calculation
Feature Manual 35