Panasonic KX-NS700 Feature Manual page 286

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

15.1.14 Private Network Features—Centralized Voice Mail
When forwarding the call, PBX-2 sends any received call information (Caller ID number/name, etc.) along
with the trunk group number to use, applicable time mode, and extension number and forwarding reason of
the original destination extension to PBX-1 as Enhanced QSIG information.
PBX Code Method
Mailbox 101
Mailbox 201
Mailbox 730101
Mailbox 730102
Extn.
Unified Messaging
101
[Explanation]
Extension 102 does not answer the CO line call, so the call is forwarded to the Unified Messaging system,
using a mailbox number containing the TIE line access number, the PBX code of the PBX that received
the call, and the extension number that received the call.
This mailbox number is the same as if an extension connected to PBX-1 called extension 102 of PBX-2.
This mailbox number should be programmed as the mailbox number and owner extension number on the
Unified Messaging system.
Multiple Voice Mail Services
More than one PBX in a network can provide voice mail services to extensions connected to other PBXs.
Conditions
[General]
This section explains Centralized Voice Mail assuming that the Unified Messaging system is being
shared. If you want to use the Centralized Voice Mail feature with a VPS over a stacking connection, refer
to the documentation of the PBX from which you will share the VPS.
KX-NSN002 (Activation Key for QSIG Network) is required for all KX-NS series PBXs that will use this
feature, whether they are hosting the voice mail service or just using it.
Note
Centralized voice mail is used only among PBXs connected over a TIE line.
A separate activation key is required for non-KX-NS series PBXs. For details, refer to the corresponding
Feature Manual.
286
Feature Manual
Telephone Company
PBX-1 (PBX
Code: 20)
Private network
Mailbox 730102:
"Hello. I am not at
my desk right now."
"7-30-102"
[PBX
code]
[Extn. no.]
[TIE line
access no.]
PBX-2 (PBX
Code: 30)
Extn.
Extn. 102
101
Fwd to Unified
Messaging
Outside Caller
TIE Line Network
PBX-3
PBX-4
PBX-5
PBX-6
PBX-7
PBX-8
Document Version 2017-06

Advertisement

Table of Contents
loading

Table of Contents