Flash/Recall/Terminate - Panasonic KX-NS700 Feature Manual

Button
INTERCOM
AUTO ANS (Auto Answer)/
MUTE
VOICE CALL/MUTE
AUTO DIAL/STORE
CONF (Conference)
FWD/DND
PAUSE
Soft
SELECT
SHIFT
MODE
NEXT PAGE
[DSS Console]
Button
ANSWER
RELEASE
Flexible CO
Flexible DSS (Direct Station
Selection)
PF (Programmable Feature)
Conditions
•
Certain buttons are equipped with a light to indicate the status of the corresponding line or feature.

7.1.2 Flash/Recall/Terminate

Description
A proprietary telephone (PT) user can use the FLASH/RECALL button (Flash/Recall mode or Terminate
mode) or Terminate button (Terminate mode) to disconnect the current call and originate another call without
hanging up.
Document Version 2017-06
Used to make or receive intercom calls.
Used to receive an incoming call in hands-free mode, or used to mute
the built-in microphone or handset during a conversation.
Used to monitor an intercom call automatically (a hands-free
conversation is not possible). Also used to mute the handset during a
conversation.
Used for System/Personal Speed Dialing and storing program
changes.
Used to establish a multiparty conversation.
Used to set Call Forwarding (FWD) or Do Not Disturb (DND).
Used to insert a dialing pause in a stored number. With an APT, it is
used as the PROGRAM button.
Used to select the item displayed on the bottom line of the display.
Used to select the displayed item or to call the displayed number.
Used to access the second level of Soft button items.
Used to change the current display to access various features.
Used to switch the page for the Self Labeling feature (KX-NT366/
KX-NT553/KX-NT556/KX-NT560 only).
Used to answer an incoming call, or place the current call on hold and
answer another call with a one-touch operation.
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.
Used to access a CO line or trunk group when making or receiving a
call according to the button's preprogrammed CO Line Access
method. Can also be customized as a different feature button.
Used to call an extension with a one-touch operation. Each button is
programmed to correspond to an extension. DSS buttons can also be
customized as other different feature buttons.
Used to access a preprogrammed feature with a one-touch operation.
(no default)
7.1.2 Flash/Recall/Terminate
Usage
Usage
Feature Manual 133