Panasonic KX-NS700 Feature Manual page 178

10.1.3 ICD Group Features—Log-in/Log-out
A flexible button can be customized as the Wrap-up button. It shows the current status as follows:
Light pattern
Slow red flashing
Red on
Off
•
When a PS in Wireless XDP Parallel Mode completes a call, neither the PS nor its wired telephone can
have Wrap-up time. (→ 22.1.6 Wireless XDP Parallel Mode)
•
Automatic Log-out
A member extension may be logged out automatically, if the Unanswered time expires a preprogrammed
number of times consecutively. The number of consecutive unanswered calls can be assigned for each
incoming call distribution group. If the extension is a member of more than one incoming call distribution
group, the unanswered number is counted across all corresponding incoming call distribution groups. It is
possible to return to log-in mode manually.
The Automatic Log-out feature does not work for extensions in an incoming call distribution group using
the Ring distribution method (→ 10.1.2 ICD Group Features—Group Call Distribution).
•
Log-in/Log-out Monitor
The supervisor extension can monitor and control the log-in/log-out status of the incoming call distribution
group members. (→ 10.1.7 ICD Group Features—Supervisory)
•
Log-in/Log-out Information on SMDR
Log-in/Log-out information can be printed out on SMDR. (→ 18.1.7 SMDR (Station Message Detail
Recording))
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→Log-in / Log-out
→Not Ready (Manual Wrap-up) Mode On / Off
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—
Miscellaneous
→No. of Unanswered Calls for Automatic Log-out
→Last Extension Log-out
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List—Wrap-up Timer
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous—Options—
Wrap-up Timer based on
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8—Wrap-up
Timer
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
→Type
→Parameter Selection (for Log-in/Log-out)
→Extension Number (for Log-in/Log-out)
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 8—Wrap-up
Timer
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
→Type
→Parameter Selection (for Log-in/Log-out)
→Extension Number (for Log-in/Log-out)
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR—Print Information—Log-in / Log-out
178 Feature Manual
Wrap-up
Not Ready
Ready (Wrap-up mode cancel)
Status
Document Version 2017-06