Call Hold - Panasonic KX-NS700 Feature Manual

4.1.4 Call Hold

•
When Caller ID information such as "Private", "Out of Area", or "Long Distance" is received, this
information will be shown instead of the caller's number and name.
•
Even if the caller's name is sent, the name may not be shown depending on the type of SLT.
•
Incoming Call Log information is not shown on the SLT.
•
Caller ID shows whether the call is an intercom or CO line call by default. This setting can be disabled
through system programming.
•
A caller ID name received from the network via a PRI23 card will not be displayed on an SLT. However, if
the received caller ID matches a System Speed Dialing entry, and a name is registered for that entry, it
will be displayed.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous
→Caller ID—Waiting to receive (s)
→Caller ID—Visual Caller ID Display (s)
10.9 PBX Configuration—[2-9] System—System Options—Option 4—Private Network—Public Call through
Private Network—Minimum Public Caller ID Digits
10.10 PBX Configuration—[2-10] System—Extension CID Settings
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—Caller ID Modification
Table
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8
→Extension Caller ID Sending
→Incoming Call Wait Timer for Extension Caller ID
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
PT Programming Manual References
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[490] Caller ID Signal Type
Feature Manual References
18.1.7 SMDR (Station Message Detail Recording)
18.1.10 Speed Dialing, Personal
18.1.11 Speed Dialing, System
4.1.4 Call Hold
Description
An extension user can put a call on hold. The following Hold features are available:
Feature
Regular Hold
Exclusive Call Hold
The result of the holding operation can be determined through system programming. Pressing the HOLD
button again just after the first time alternates the mode between Regular and Exclusive Call Hold.
Conditions
•
Call Hold Limitation
46 Feature Manual
Any extension can retrieve a held call.
Only the extension user who held the call can retrieve it.
Description
Document Version 2017-06