1.25.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a
confirmation tone to extension users.
Tone 1
Tone 2
Tone 3-1
Tone 3-2
Tone 4-1
Tone 4-2
Tone 5
Conditions
•
Confirmation Tone Patterns and Frequencies
All confirmation tone patterns and frequencies can be arranged as desired. For default
patterns, refer to the Appendix in Section 3.1.
•
It is possible to eliminate each tone.
Type
a) Sent when the setting is accepted.
b) Sent when a call is received in Voice Calling mode. The
caller's voice will be heard after the tone.
a) Sent from an external paging device or an extension before
being paged.
b) Sent when a call is received in Hands-free Answerback
mode.
a) Sent before a conversation is established when using the
Paging feature.
b) Sent when a conversation is established with the extension
in the following modes after the call making operation:
Sent just before a conversation is established when accessing
the following features by the feature numbers:
•
•
•
•
•
Sent when moving from a two-party call to a three-party call.
(e.g., Executive Busy Override, Conference, Privacy Release,
Two-way Recording.)
Sent when moving from a three-party call to a two-party call.
(e.g., Executive Busy Override, Conference, Privacy Release,
Two-way Recording.)
Sent when a call is placed on hold (including Consultation Hold).
Description
•
Hands-free Answerback mode
•
Voice Calling mode
Call Park Retrieve
Call Pickup
Hold Retrieve
Paging Answer
TAFAS
1.25 Audible Tone Features
Feature Guide
215