Dsp Resource Advisor - Panasonic KX-NS700 Feature Manual

5.1.16 DSP Resource Advisor

The video feed from a network camera can be displayed on the telephone's display when a call from a
doorphone is received if the following settings are configured on the telephone:
–
The doorphone's 2-digit number is registered to a contact, and Doorphone is selected as the number's
label.
–
The network camera is registered to the contact.
For details about the settings, refer to the telephone's documentation.
Installation Manual References
4.7.1 DPH2 Card (KX-NS5162)
4.9 Connecting to a Doorphone, Door Opener, and/or External Sensor
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—DISA / Door / Reminder / U. Conf
→Doorphone—Call Ring Duration (x10s)
→Doorphone—Call Duration (x10s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—DOORPHONE Call
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS—TRS Level—Day,
Lunch, Break, Night
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns—Call from DOORPHONE
10.9 PBX Configuration—[2-9] System—System Options—Option 3—Confirmation Tone—Tone 1 : Called
by Voice
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
PT Programming Manual References
[720] Doorphone Call Destination
[729] Doorphone Number Reference
Operating Manual References
1.3.22 Doorphone Call
5.1.16 DSP Resource Advisor
Description
Web Maintenance Console provides a tool for calculating the number of resources required for a given set
of operating conditions. The Web Maintenance Console user provides information such as the number of
ports for a given resource (e.g., 16 extension ports using the G.729 codec) and the expected usage load
(e.g., 50% busy), and the resource advisor calculates the number of DSP resources required to meet those
conditions.
This tool can be used in offline mode to simulate various PBX configurations and usage cases to help
determine the size of DSP card required.
This tool will also recommend which and how many resources to reserve for various features
(→ 5.1.17 DSP Resource Reservation). The recommended settings can be applied immediately from the
resource advisor tool.
The resource usage can be calculated using the following types of services and features:
CO line using G.729 codec
CO line using G.711 codec
Non-IP CO line (ISDN CO line, analog CO line, etc.)
110 Feature Manual
Service/Feature DSP Resources per Unit
2.2
1
1
Document Version 2017-06