Omron E5GC User Manual page 333

sub1
sub2
sub3
sub4
• These parameters set the function to assign to auxiliary outputs 1 to 4.
If c-o is assigned for standard control, a value equivalent to 0% will be output.
*1
*2 · If heating/cooling control is selected for the E5CC, E5CC-B, E5CC-U, or E5DC when there is
· If heating/cooling control is selected for the E5EC, E5EC-B, or E5AC when there is only one
· When heating/cooling control is selected for the E5GC, auxiliary output 1 is assigned as the
E5@C Digital Temperature Controllers User's Manual (H174)
Auxiliary Output 1 Assignment
Auxiliary Output 2 Assignment
Auxiliary Output 3 Assignment
Auxiliary Output 4 Assignment
Setting range
none:
Disabled
o:
Control output (heating)
c-o:
Control output (cooling)
alm1:
Alarm 1
alm2:
Alarm 2
alm3:
Alarm 3
alm4:
Alarm 4
ha:
Heater alarm
hb:
HB alarm
hs:
HS alarm
s.err:
Input error
rs.er:
RSP input error
p.end:
Program end output
run:
RUN output
alm:
Integrated Alarm
wr1:
*4
Work bit 1
wr2:
*4
Work bit 2
wr3:
*4
Work bit 3
wr4:
*4
Work bit 4
wr5:
*4
Work bit 5
wr6:
*4
Work bit 6
wr7:
*4
Work bit 7
wr8:
*4
Work bit 8
only one control output, the auxiliary output 2 terminal is assigned as the control output for
cooling. (If the Digital Controller has only one auxiliary output, an output is not automatically
allocated for the control output for cooling.)
control output, the auxiliary output 4 terminal is assigned as the control output for cooling. (If
the Digital Controller has only two auxiliary outputs, auxiliary output 2 is allocated as the
control output for cooling.)
control output for cooling.
There must be an auxiliary output 1.
There must be an auxiliary output 2.
There must be an auxiliary output 3.
There must be an auxiliary output 4.
Auxiliary Output 1 Assignment: alm1
Auxiliary Output 2 Assignment: alm2
*1
Auxiliary Output 3 Assignment: alm3
Auxiliary Output 4 Assignment: alm4
*3
6 Parameters
000
Default
*5
*2
*2
*2
6 - 81
6