Omron E5GC User Manual page 267

al1h
al2h
al3h
al4h
al1l
al2l
al3l
al4l
These parameters individually set the alarm value upper and lower limits when a mode for setting the
upper and lower limits is selected for the Alarm 1 to 4 Type parameter (Initial Setting Level).
• These parameters set the upper and lower limits for alarms 1 to 4.
• During temperature input, the decimal point position depends on the currently selected
sensor, and during analog input it depends on the Decimal Point parameter setting.
Function
Setting
Related Parameters
See
See
Input Type (Initial Setting Level): Page 6-42
Scaling Upper Limit, Scaling Lower Limit, and Decimal Point (Initial Setting Level): Page
6-43
Alarm 1 to 4 Type (Initial Setting Level): Page 6-47
Alarm 1 to 4 Hysteresis (Initial Setting Level): Page 6-51
Standby Sequence Reset (Advanced Function Setting Level): Page 6-63
Auxiliary Output 1 to 4 Open in Alarm (Advanced Function Setting Level): Page 6-64
Alarm 1 to 4 Latch (Advanced Function Setting Level): Page 6-70
E5@C Digital Temperature Controllers User's Manual (H174)
Alarm Value Upper Limit 1
Alarm Value Upper Limit 2
Alarm Value Upper Limit 3
Alarm Value Upper Limit 4
Alarm Value Lower Limit 1
Alarm Value Lower Limit 2
Alarm Value Lower Limit 3
Alarm Value Lower Limit 4
Setting range
−1999 to 9999
Alarm 1 to alarm 4 must be assigned.
The Alarm 1 to 4 Type parameter must be set to 1,
4, or 5.
Unit Default
EU 0
6 Parameters
6
6 - 15