Using Indicators To Locate Faults - Huawei TaiShan Troubleshooting Manual

TaiShan Servers
Troubleshooting

5.5 Using Indicators to Locate Faults

This section describes how to check indicators to locate faults.
Process
Figure 5-2
Figure 5-2 Process for checking the indicators
Step 1 Observe the status indicators of the server.
Table 5-4 Status indicators
Indicator
Health status
indicator
Issue 12 (2022-08-30)
NO TE
For details about the positions of indicators, see section "Components" in the user guide of
the specific server. To obtain the user guide of each server, perform the following steps:
1. Log in to the support website and choose
Ascend Computing.
2. Choose a server model to access the product page.
3. On the Documentation tab page, choose Operation & Maintenance > User Guide.
4. View section "Components" in the required user guide.
shows the process for checking the indicators.
Status
Blinking red
at 1 Hz
Copyright © Huawei Technologies Co., Ltd.
5 Diagnosing and Rectifying Faults
Support > Kunpeng Computing
Description
A major alarm is
generated.
or Support >
Diagnosis
1. Log in to the iBMC
WebUI to view the
16