Huawei TaiShan Troubleshooting Manual page 15

TaiShan Servers
Troubleshooting
Table 3-2 Software tools required for routine maintenance
Tool
FusionServer
Tools SmartKit
Smart
Provisioning
PuTTY
WinSCP
Hardware Tools
Table 3-3
Table 3-3 Hardware tools for routine maintenance
Tool
Floating nut hook
Screwdriver
Diagonal pliers
Multimeter
ESD wrist strap
Issue 12 (2022-08-30)
Server and
Version
For details, see
the FusionServer
Tools SmartKit
User Guide.
For details, see
the Smart
Provisioning
User Guide.
All servers of all
versions
All servers of all
versions
lists the hardware tools required for routine maintenance of servers.
Description
Used to guide floating nuts to the holes in the
mounting bars of a rack.
Used to tighten and loosen screws. A screwdriver can be
a flat-head, Phillips, hex screwdriver.
Used to trim insulation tubes and cable ties.
Used to measure the resistance and voltage and to
check connectivity.
Used to prevent ESD damage when you touch or
operate devices or components.
Copyright © Huawei Technologies Co., Ltd.
3 Preparing for Troubleshooting
Description
Used for new site deployment and
delivery, troubleshooting, and firmware
upgrade.
Download addresses:
● Enterprise users: FusionServer Tools
● Carrier users: Contact the technical
support personnel of the local Huawei
office.
Used to install OSs without a physical
DVD-ROM drive, configure RAID, upgrade
firmware, and perform troubleshooting.
Download addresses:
● Enterprise users: Smart Provisioning
● Carrier users: Contact the technical
support personnel of the local Huawei
office.
Third-party tool used for remote access.
You can obtain the tool from the Internet.
Third-party tool used for file transfer for
iBMC or the OS. You can obtain the tool
from the Internet.
8