Grounding using RG-6
non-quad shielded cable
Chapter 5 • Grounding requirements
82
1035678-0001 DRAFT Revision 1.04
AC Mains
1. Gnd Rod
2.Water Pipe
AC GND Wire
GND Block Wire
Universal Mount Mast Ground (GND)
G-26076 F
07/08/03
Figure 36: Grounding the mast using RG-6 quad-shielded cable
This procedure is optional. You may have to use this procedure if
you are not using an RG-6 quad-shielded cable, or if it is required
by local codes.
GND Block
1. Gnd Rod
2. Water Pipe
3. AC Gnd Wire
Receive cable (RG6)
Transmit cable (RG6)
Ground wire (8 AWG aluminum)